Search Results

Standard

FAN HUB BOLT CIRCLES AND PILOT HOLES

1995-06-28

HISTORICAL

J635_199506

The purpose of this SAE Recommended Practice is to encourage the standardization of mounting patterns for engine cooling fans as new engines are designed and developed in SI metric units. It is specifically not the objective of the specification to address the soft metric conversion of existing mounting patterns on engines designed in English units. The scope of the specification is limited to heavy-duty diesel engine manufacturers, fan suppliers, and end users. Standard mounting patterns are given for fans up to 2000 mm rotating diameter. Passenger car and light-duty fans were not addressed because committee members issuing the specification felt that standards for these fans could be better addressed by personnel working in the market segments which use those fans. See Figure 1 and Table 1. Rationale for issuance of the specification is cost savings through reduction of part numbers and inventory.

Standard

Fan Hub Bolt Circles and Pilot Holes

2008-11-14

HISTORICAL

J635_200811

This Recommended Practice applies to engine cooling fans up to 2000 mm in diameter with a mounting interface consisting of a pilot hole and a circular bolt pattern. Most of these fans are belt, gear, clutch, hydraulically, or electrically driven.

Standard

REQUIREMENTS FOR ENGINE COOLING SYSTEM FILLING, DEAERATION, AND DRAWDOWN TESTS

1995-07-01

HISTORICAL

J1436_199507

This SAE Information Report is applicable to all engine cooling systems used in heavy-duty vehicles and industrial applications.

Standard

Requirements for Engine Cooling System Filling, Deaeration, and Drawdown Tests

2004-07-13

HISTORICAL

J1436_200407

This SAE Information Report is applicable to all engine cooling systems used in heavy-duty vehicles, industrial applications, and automotive applications

Standard

Radiator Nomenclature

2018-10-09

CURRENT

J631_201810

This SAE Recommended Practice documents nomenclature in common use for various types of radiator and radiator core construction, as well as for various radiator-related accessories.

Standard

Radiator Nomenclature

2013-11-07

HISTORICAL

J631_201311

This SAE Standard documents standard nomenclature in common use for various types of radiator and radiator core construction, as well as for various radiator-related accessories.

Standard

Radiator Nomenclature

2007-09-11

HISTORICAL

J631_200709

This SAE Standard documents standard nomenclature in common use for various types of radiator and radiator core construction, as well as for various radiator-related accessories.

Standard

Radiator Nomenclature

1998-09-01

HISTORICAL

J631_199809

This SAE Standard documents standard nomenclature in common use for various types of radiator and radiator core construction, as well as for various radiator-related accessories.

Standard

RADIATOR NOMENCLATURE

1993-04-01

HISTORICAL

J631_199304

This SAE Standard documents standard nomenclature in common use for various types of radiator and radiator core construction, as well as for various radiator-related accessories.

Standard

RADIATOR NOMENCLATURE

1988-08-01

HISTORICAL

J631_198808

Standard

Radiator Caps and Filler Necks

2018-04-05

HISTORICAL

J164_201804

This SAE Standard was developed primarily for passenger car and truck application, but may be used in marine, industrial, and similar applications.

Standard

Radiator Caps and Filler Necks

2012-07-20

HISTORICAL

J164_201207

This SAE Standard was developed primarily for passenger car and truck application, but may be used in marine, industrial, and similar applications.

Standard

Radiator Caps and Filler Necks

2011-03-22

HISTORICAL

J164_201103

This SAE Standard was developed primarily for passenger car and truck application, but may be used in marine, industrial, and similar applications.

Standard

Radiator Caps and Filler Necks

2005-02-07

HISTORICAL

J164_200502

This SAE Standard was developed primarily for passenger car and truck application, but may be used in marine, industrial, and similar applications.

Standard

RADIATOR CAPS AND FILLER NECKS

1997-02-01

HISTORICAL

J164_199702

This SAE Standard was developed primarily for passenger car and truck application, but may be used in marine, industrial, and similar applications.

Standard

RADIATOR CAPS AND FILLER NECKS

1982-04-01

HISTORICAL

J164_198204

This standard was developed primarily for passenger car and truck application, but may be used in marine, industrial, and similar applications.

Standard

RADIATOR CAPS AND FILLER NECKS

1979-07-01

HISTORICAL

J164_197907

This standard was developed primarily for passenger car and truck application, but may be used in marine, industrial, and similar applications. [[ts]]

Standard

Test Method for Measuring Performance of Engine Cooling Fans

2015-04-09

HISTORICAL

J1339_201504

This SAE Recommended Practice is intended for use in testing and evaluating the approximate performance of engine-driven cooling fans. This performance would include flow, pressure, and power. This flow and pressure information is used to estimate the engine cooling performance. This power consumption is used to estimate net engine power per SAE J1349. The procedure also provides a general description of equipment necessary to measure the approximate fan performance. The test conditions in the procedure generally will not match those of the installation for which cooling and fuel consumption information is desired. The performance of a given fan depends on the geometric details of the installation, including the shroud and its clearance. These details should be duplicated in the test setup if accurate performance measurement is expected.

Standard

Test Method for Measuring Performance of Engine Cooling Fans

2019-09-30

CURRENT

J1339_201909

This SAE Recommended Practice is intended for use in testing and evaluating the approximate performance of engine-driven cooling fans. This performance would include flow, pressure, and power. This flow and pressure information is used to estimate the engine cooling performance. This power consumption is used to estimate net engine power per SAE J1349. The procedure also provides a general description of equipment necessary to measure the approximate fan performance. The test conditions in the procedure generally will not match those of the installation for which cooling and fuel consumption information is desired. The performance of a given fan depends on the geometric details of the installation, including the shroud and its clearance. These details should be duplicated in the test setup if accurate performance measurement is expected.

Standard

Test Method for Measuring Performance of Engine Cooling Fans

2002-08-05

HISTORICAL

J1339_200208

This SAE recommended Practice is intended for use in testing and evaluating the approximate performance of engine cooling fans. This performance would include flow, pressure, and power. This flow and pressure information would then be used to estimate the engine cooling performance. This power consumption would then be used to estimate net engine power per SAE J1349. The procedure also provides a general description of equipment necessary to measure the approximate fan performance. The test conditions in the procedure generally will not match those of the installation for which cooling and fuel consumption information is desired. The performance of a given fan depends on the geometric details of the installation, including the shroud and its clearance. These details should be duplicated in the test setup if accurate performance measurement is expected.